2010 Honda Civic Oil Capacity

The below table is based on the 2010 Honda Civic  owner’s manual, and it is important to check the manual of your specific vehicle for the most accurate information.

Engine Type Oil Type Oil Capacity (quarts/liters)
1.8L 4-cyl Synthetic 0W-20 3.9 quarts / 3.7 liters

What kind of oil does a 2010 Honda Civic take?

The recommended oil type for a 2010 Honda Civic is synthetic motor oil 0W-20, SAE 5w-30 viscosity, fully synthetic motor oil.  It is crucial to adhere to the manufacturer’s recommendations to maintain the vehicle’s warranty and avoid damage to the engine.

Regarding oil capacity, it varies based on the engine type. The 2010 Honda Civic requires between 3.2 quarts and 4.6 quarts of oil.The Civic DX, Canadian DX-G, LX, EX, and EX-L models have an oil capacity of 3.9 quarts, while the Si model requires 4.6 quarts.

The manufacturer recommends changing the oil every 7,500 miles driven. It is essential to use oil designed specifically for a car engine and a smaller engine, as using the wrong oil type or viscosity can damage the engine.

Some of the recommended oil brands for a 2010 Honda Civic include Mobil 1, Pennzoil, Royal Purple, and Valvoline. It is crucial to choose a reputable and trustworthy brand to ensure the best results.

To complete a full oil change, it is recommended to use the appropriate amount of oil based on the engine type. The oil capacity for a 2010 Honda Civic ranges from 3.2 quarts to 4.6 quarts, depending on the model. It is crucial to add the recommended amount of oil slowly and check the oil level using the dipstick to avoid overfilling the engine.

How often do you change the oil on a 2010 Honda Civic?

The recommended frequency for changing the oil on a 2010 Honda Civic is approximately every 7,500 miles. However, the specific maintenance schedule may vary based on the manufacturer’s recommendations and the driving conditions.

Not changing the oil at the recommended intervals can lead to significant negative consequences for the vehicle’s engine. As oil circulates through the engine, it helps to lubricate the moving parts and prevent friction and wear. Over time, the oil can become contaminated with dirt, dust, and other debris, making it less effective at performing these functions. If the oil is not changed in a timely manner, it can become too thick and viscous, reducing its ability to flow through the engine and cool critical components. In addition, old oil can develop sludge or varnish, which can damage engine seals and cause premature wear of engine parts. Over time, the engine may begin to run poorly, experience decreased performance, and eventually fail.

How much will it cost to change oil and filter on a 2010 Honda Civic in the US?

The average cost of an oil change for a Honda Civic ranges from $98 to $124, with the national average cost being around $104. The cost of parts and labor can also vary, with parts usually costing around $33 and labor costing around $71 on average. It is important to note that the cost can be affected by factors such as the type of oil and filter used, as well as any additional services performed during the oil change.

2010 Honda Civic Oil Change (Video)

2010 Honda Civic Oil Change

Leave a Comment