Here’s a table for 2010 Toyota Yaris Engine Models:
Engine Model | Oil Type | Oil Capacity with Filter (quarts/liters) |
1.5L 4-cyl | 5W-30 | 3.7 / 3.5 |
What kind of oil does a 2010 Toyota Yaris take?
The 2010 Toyota Yaris requires 5W-30 oil, which meets the API certification and is approved by the ILSAC. Toyota recommends using synthetic or conventional oil with a viscosity rating of 5W-30.
Some suitable oil brands for the 2010 Toyota Yaris are:
- Mobil 1 Synthetic 5W-30
- Castrol GTX 5W-30
- Valvoline SynPower 5W-30
- Pennzoil Platinum Full Synthetic 5W-30
To complete a full oil change on a 2010 Toyota Yaris, you will need approximately 3.7 quarts (3.5 liters) of oil.
How often do you change the oil on a 2010 Toyota Yaris?
Professional mechanics generally recommend changing the oil on a 2010 Toyota Yaris every 5,000 to 7,500 miles (8,000 to 12,000 kilometers) or every 6 months, whichever comes first. However, it is important to check the owner’s manual for the manufacturer’s recommended oil change interval, as it may vary depending on driving conditions and other factors. If you frequently drive in severe conditions, such as extreme temperatures or dusty environments, you may need to change the oil more frequently.
How much will it cost to change oil and filter on a 2010 Toyota Yaris in the US?
The cost of an oil change and filter replacement for a 2010 Toyota Yaris can vary depending on several factors, including the location, the type of oil used, and the service provider. On average, the cost of a conventional oil change and filter replacement for a Toyota Yaris in the US can range from 30$ to 50$, while a synthetic oil change and filter replacement can cost between 60$ and 80$.
What are the signs of an oil change in the 2010 Toyota Yaris?
In addition to monitoring the mileage on your 2010 Toyota Yaris, there are several signs that indicate it is time for an oil change. Here are a few things to look out for:
- Dark or dirty oil: Over time, oil can become contaminated with dirt, debris, and other particles, causing it to appear dark or dirty. If you notice that your oil is significantly darker than when it was first added, it may be time for a change.
- Engine noise: If you hear unusual engine noises, such as knocking or ticking sounds, it may be a sign that your oil is dirty or low.
- Warning lights: If your oil pressure warning light comes on, it may be an indication that your oil is low or that there is a problem with your oil system.
- Poor performance: Dirty or low oil can also cause your engine to run poorly, resulting in decreased acceleration, reduced fuel efficiency, and other performance issues.