Here’s a table for 2010 Toyota Highlander Engine Models:
| Engine Model | Oil Type | Oil Capacity with Filter (quarts/liters) |
| 2.7L 4-cylinder | 5W-30 | 4.6 quarts (4.3 liters) |
| 3.5L V6 | 5W-30 | 6.4 quarts (6.1 liters) |
- 1 What kind of oil does a 2010 Toyota Highlander take?
- 2 How often do you change the oil on a 2010 Toyota Highlander?
- 3 How much will it cost to change oil and filter on a 2010 Toyota Highlander in the US?
- 4 What are the signs of an oil change in the 2010 Toyota Highlander?
- 5 2010 Toyota Highlander Oil Change (Video)
What kind of oil does a 2010 Toyota Highlander take?
The 2010 Toyota Highlander requires synthetic 5W-30 oil that meets API specifications SM or higher. The manufacturer recommends using synthetic oil for better engine performance and protection.
Some suitable oil brands for the 2010 Toyota Highlander include Mobil 1, Castrol EDGE, Valvoline Advanced, and Pennzoil Platinum.
The amount of oil needed for a full oil change depends on the engine model. The 2.7L 4-cylinder engine requires 4.6 quarts (4.3 liters) of oil with filter, while the 3.5L V6 engine requires 6.4 quarts (6.1 liters) of oil with filter.
How often do you change the oil on a 2010 Toyota Highlander?
According to professional mechanics, the recommended oil change interval for a 2010 Toyota Highlander is every 5,000 to 7,500 miles or every 6 months, whichever comes first. However, it’s important to note that the oil change interval can vary depending on factors such as driving conditions, climate, and the type of oil used.
How much will it cost to change oil and filter on a 2010 Toyota Highlander in the US?
The cost of an oil change and filter replacement for a 2010 Toyota Highlander can vary depending on the location and the service provider. On average, the cost ranges from 50$ to 100$ in the US. However, the cost can be higher or lower depending on the type of oil and filter used, the labor rates of the service provider, and any additional services that may be performed during the oil change.
What are the signs of an oil change in the 2010 Toyota Highlander?
In addition to the recommended mileage interval for oil changes, there are several signs that you should look out for that may indicate that your 2010 Toyota Highlander needs an oil change. Here are some of the common signs:
- Dark or dirty oil: As the oil ages, it can become contaminated with dirt and debris, causing it to turn dark or dirty. If you check the oil on the dipstick and it appears dark or dirty, it may be time for an oil change.
- Engine noise: If you hear unusual engine noise, such as knocking or ticking, it could be a sign that your engine is not getting enough oil. This can be caused by low oil levels or dirty oil that is not lubricating the engine properly.
- Oil warning light: If the oil warning light comes on while you are driving, it could be a sign that your engine is not getting enough oil pressure. This can be caused by low oil levels or a clogged oil filter.
- Exhaust smoke: If you see blue or gray smoke coming from your exhaust, it could be a sign that your engine is burning oil. This can be caused by dirty or low oil levels.
2010 Toyota Highlander Oil Change (Video)
